Réparez vos affaires Communauté Boutique

iMac Intel 27" EMC 2390 Access Door Replacement

Introduction

Remove the access door to replace RAM modules.

Ce dont vous avez besoin

  1. iMac Intel 27" EMC 2390 Access Door Replacement, Access Door: étape 1, image 1 de 2 iMac Intel 27" EMC 2390 Access Door Replacement, Access Door: étape 1, image 2 de 2

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

12 autres ont terminé cette réparation.

Un commentaire

Easy mode. Note that the bits is called PZ1 most screwdriver sets. Also known as Japanese Phillips, the bid comes to a + instead of to a point. A 2.0 flathead will also turn the screw

Kevin McCartney - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 25

Total : 9,011