iMac Intel 27" EMC 2429 RAM Replacement

Introduction

This guide will help you replace the RAM.

Ce dont vous avez besoin

Étape 1 Access Door

iMac Intel 27" EMC 2429 RAM Replacement, Access Door: étape 1, image 1 de 2

iMac Intel 27" EMC 2429 RAM Replacement, Access Door: étape 1, image 2 de 2

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.
These screws will remain captive in the access door.
Remove the access door from your iMac.
During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

Traduire

Étape 2 RAM

iMac Intel 27" EMC 2429 RAM Replacement, RAM: étape 2, image 1 de 1

Use your fingers or the tip of a spudger to slide the black plastic RAM tray pull tab out of the RAM slot.

Traduire

Étape 3

Pull the black plastic tab away from the iMac to eject the RAM chip from its socket.
The RAM modules are firmly seated and may require a fair amount of force to remove.
Use your fingers to slide the RAM chip out of its socket.
If necessary, repeat this process for the other RAM module(s).

Traduire

Conclusion

To reassemble your device, follow these instructions in reverse order.

90 autres ont terminé cette réparation.

Auteur

avec 8 autres contributeurs

Phillip Takahashi

Membre depuis le 08/22/11

86 704 Réputation

87 tutoriels rédigés

Badges: 43

+ 40 badges supplémentaires

14 commentaires

My iMac 21.5-inch Mid 2011 has EMC 2428, but still directions turned out to be the same.

I replaced the memory in my MacBook Pro, and used the old cards (2x2GB) to fill out the 2 empty slots that apple left empty, doubled the memory of 2 machines for the price of one ^_^

Mabel - 29 mai 2013 Réponse