This guide shows you the steps needed to recycle an iMac and turn it into a neat whiteboard. I recommend verifying that you can no longer fix or use your iMac and when you tear it down, try to save as many components or parts for future repairs. Hope you find it useful!

This guide gives you the whiteboard measurements for working with a 24inch iMac.

We start up with an empty case of an iMac.
  • We start up with an empty case of an iMac.

  • For directions on removing all of the interior components from your iMac, check out the 24" iMac EMC 2111 device page.

  • This procedure should also work on an iMac G5 or early Intel iMac.

Ajouter un commentaire

Unscrew the case and take the 56x35 whiteboard, check that it fits nicely.
  • Unscrew the case and take the 56x35 whiteboard, check that it fits nicely.

Ajouter un commentaire

  • Apply contact cement to the inside borders of the front case. Leave to dry for about 5 minutes.

Ajouter un commentaire

  • Place the whiteboard onto the front case and put weight on it.

  • Make sure that the whiteboard touches the lower side of the metal panel.

  • Leave to dry out for a day.

Ajouter un commentaire

  • Mark up 4 lines of 4cm each on the cardboard.

  • Cut up a rectangle and fold to make up a cylinder. Use scotch tape to hold them together.

  • Repeat to get 2 more cylinders.

Ajouter un commentaire

  • Glue the cylinders to the back case of the iMac.

  • This is to have some pressure against the whiteboard.

Ajouter un commentaire

  • After the contact cement has dried, take out the small contact cement remnants from the board with a box cutter and a plastic tool (as to not damage the whiteboard)

Ajouter un commentaire

  • Reassemble your iMac and write something on it.

Ajouter un commentaire


Very useful mobile whiteboard!

2 autre(s) ont terminé cette réparation.

Angela Penaherrera

Membre depuis le 06/05/2013

11 855 Réputation

5 tutoriels rédigés

Great idea! How about adding an attachment to the bottom of the stand to hold a book open. Maybe use the speaker case cut to size. Affix it using the holes for the RAM access plate.

mayer - Réponse

Thats a great idea too! If you add the stand post some pics ^_^

Angela Penaherrera -

Angela, I tried contacting you via twitter, would you click on my icon and email me. This is about my possible relocation to Ecuador .

mayer - Réponse

Done! Check your inbox :)

Angela Penaherrera -

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 1

7 derniers jours : 8

30 derniers jours : 28

Total : 6,486