Introduction

This guide covers the disassembly of the iON SnapCam 1045 battery.

Pièces

Aucune pièce nécessaire.

Detach the magnetic  clip from the bottom  of the camera.
  • Detach the magnetic clip from the bottom of the camera.

  • The magnetic clip gets in the way of disassembly because it constantly spins and therefore a distraction so it is imperative to detach.

Ajouter un commentaire

Use a spudger to  gently detach  the  memory card and USB slot cover.
  • Use a spudger to gently detach the memory card and USB slot cover.

Ajouter un commentaire

  • Use a Phillips #000 Screwdriver to loosen the 0.008 mm screw located between the USB and memory card slots.

  • This screw is really tiny and can easily fall off and get lost! Make use of a magnetic mat to hold it in place or better still put the magnetic clip to use for keeping the screw safe.

Ajouter un commentaire

  • Once again use the spudger to gently open the encasement.

  • The case is a little fragile and forceful entry could lead to damage of the plastic case. Thread carefully.

  • The Battery can be safely detached and replaced.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Olakunle

Membre depuis le 11/11/2017

102 Réputation

1 tutoriel rédigé

Équipe

IUPUI, Team S3-G3, Wilson Fall 2017 Membre de l'équipe IUPUI, Team S3-G3, Wilson Fall 2017

IUPUI-WILSON-F17S3G3

3 membres

3 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 116