Réparez vos affaires Communauté Boutique

iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Internal Prereq.

Ce dont vous avez besoin

  1. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement, Heaphone Jack & Front Camera Assembly: étape 1, image 1 de 3 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement, Heaphone Jack & Front Camera Assembly: étape 1, image 2 de 3 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement, Heaphone Jack & Front Camera Assembly: étape 1, image 3 de 3

    • Use the flat end of a plastic opening tool to flip up the retaining flap on the headphone jack and front-facing camera ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

    • Run a plastic opening tool underneath the headphone jack and front-facing camera cable to free it from the adhesive attaching the cable to the rear panel.

    • Pull the headphone jack and front-facing camera ribbon cable straight out of its socket on the logic board.

    Traduire

  2. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 2, image 1 de 1

    • Remove the two 2.9 mm Phillips screws securing the headphone jack to the rear panel.

    Traduire

  3. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 3, image 1 de 2 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 3, image 2 de 2

    • Use the edge of a plastic opening tool to peel the tape and the adhesive securing the headphone jack & front camera cables to the rear panel.

    Traduire

  5. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 4, image 1 de 1

    • Pull the headphone jack away from the top edge of the iPad.

    • Don't try to remove the assembly just yet. The front camera is still stuck to the rear panel.

    Traduire

  6. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 5, image 1 de 1

    • Lift the headphone jack & front camera cables slightly to access the microphone connector.

    • Use the edge of a plastic opening tool to separate the microphone connector from its socket on the headphone jack & front camera cables.

    Traduire

  7. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 6, image 1 de 2 iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 6, image 2 de 2

    • Peel the front camera off the foam adhesive securing it to the rear panel.

    • Remove the headphone jack & front camera assembly from the iPad.

    Traduire

  8. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 7, image 1 de 1

    • Carefully remove the strip of tape covering the front camera cable connector.

    Traduire

  9. iPad 2 Wi-Fi EMC 2415 Heaphone Jack & Front Camera Assembly Replacement: étape 8, image 1 de 1

    • Use the edge of a plastic opening tool to disconnect the front camera cable from the headphone jack cable.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 512