Aller au contenu principal

iPad 3 4G Headphone Jack Cable Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. iPad 3 4G Headphone Jack Cable Replacement, Headphone Jack Cable: étape 1, image 1 de 3 iPad 3 4G Headphone Jack Cable Replacement, Headphone Jack Cable: étape 1, image 2 de 3 iPad 3 4G Headphone Jack Cable Replacement, Headphone Jack Cable: étape 1, image 3 de 3
    • Peel back and remove the piece of electrical tape covering the headphone jack assembly cable connector.

    • Using the tip of a spudger, flip up the retaining flap on both of the ZIF connectors securing the headphone jack cable to the logic board.

  2. iPad 3 4G Headphone Jack Cable Replacement: étape 2, image 1 de 3 iPad 3 4G Headphone Jack Cable Replacement: étape 2, image 2 de 3 iPad 3 4G Headphone Jack Cable Replacement: étape 2, image 3 de 3
    • Slide the flat end of a spudger underneath the headphone jack assembly cable, releasing the adhesive securing it to the rear aluminum frame.

    • Pull the headphone jack assembly cable straight out of its socket on the logic board.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 105