Réparez vos affaires Communauté Boutique

iPad 4 CDMA Home Button Control Board Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prereq only, new front panel adhesive strips.

Ce dont vous avez besoin

  1. iPad 4 CDMA Home Button Control Board Replacement, Home Button Control Board: étape 1, image 1 de 2 iPad 4 CDMA Home Button Control Board Replacement, Home Button Control Board: étape 1, image 2 de 2

    • The two small notched trapezoidal strips will be used to attach the home button bracket to the front panel.

    • Carefully peel off the first trapezoidal adhesive strip with a pair of tweezers.

    • Using a pair of tweezers, place the first trapezoidal adhesive strip (minding its correct orientation) on the matching side of the home button mounting bracket.

    • Make sure to line up the profile of the strip with the edge of the mounting bracket.

    • Repeat the procedure for the second trapezoidal adhesive strip.

    Traduire

  3. iPad 4 CDMA Home Button Control Board Replacement: étape 2, image 1 de 1

    • Use a pair of tweezers to grasp the corner of one of the adhesive strips placed on the mounting bracket.

    • Lift and peel the clear backing up off the adhesive strip, revealing the black adhesive strip.

    • Repeat the procedure for the secondary adhesive strip.

    Traduire

  4. iPad 4 CDMA Home Button Control Board Replacement: étape 3, image 1 de 2 iPad 4 CDMA Home Button Control Board Replacement: étape 3, image 2 de 2

    • Gently place the home button mounting bracket on top of the home button.

    • Make sure the home button mounting bracket is lined up with the bottom of the digitizer.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 175