Aller au contenu principal

iPad Mini CDMA GPS Antenna Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. iPad Mini CDMA GPS Antenna Replacement, GPS Antenna: étape 1, image 1 de 1
    • Remove the following screws securing the GPS antenna to the rear case:

    • One 2.5 mm Phillips #00

    • Two 1.1 mm Phillips #00

    • One 1.2 mm Phillips #00

  2. iPad Mini CDMA GPS Antenna Replacement: étape 2, image 1 de 3 iPad Mini CDMA GPS Antenna Replacement: étape 2, image 2 de 3 iPad Mini CDMA GPS Antenna Replacement: étape 2, image 3 de 3
    • Use the flat end of a spudger to loosen the foam adhesive holding the GPS antenna to the right speaker.

  3. iPad Mini CDMA GPS Antenna Replacement: étape 3, image 1 de 2 iPad Mini CDMA GPS Antenna Replacement: étape 3, image 2 de 2
    • Gently de-route the antenna cable from the bottom right corner of the rear case.

    • Move the antenna out of the way of the right speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 59