Réparez vos affaires Communauté Boutique

iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Prereq only, does not remove antenna, battery is in.

Ce dont vous avez besoin

  1. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement, Wi-Fi/Bluetooth Antenna: étape 1, image 1 de 1

    • Remove the following three screws securing the bottom left antenna to the rear case:

    • One 1.2 mm Phillips #00

    • One 1.1 mm Phillips #00

    • One 2.5 mm Phillips #00

    Traduire

  2. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 2, image 1 de 2 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 2, image 2 de 2

    • Use the flat end of a spudger to loosen the foam adhesive securing the Wi-Fi antenna to the left speaker.

    Traduire

  3. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 3, image 1 de 2 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 3, image 2 de 2

    • Use the flat end of a spudger to fold the left-hand wide piece of tape away from the left speaker.

    Traduire

  4. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 4, image 1 de 1

    • The antenna cable is secured with two pieces of tape: the wide tape that continues onto the rear case, and its own small piece of tape that is covered by the wide tape.

    • In the next steps you'll be separating the wide tape from the antenna cable's tape with the tip of a spudger in the gap between the two pieces.

    Traduire

  5. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 5, image 1 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 5, image 2 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 5, image 3 de 3

    • Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker.

    • Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to break the adhesive connecting the two.

    • Continue pulling the wide tape until it is no longer covering the antenna cable.

    Traduire

  7. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 6, image 1 de 1

    • The right-hand wide piece of tape covers the antenna cable in the same way as the left.

    Traduire

  8. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 7, image 1 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 7, image 2 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 7, image 3 de 3

    • Pull the wide tape toward the top of the iPad, applying constant force to release it from the antenna cable between it and the speaker.

    • Slide the tip of a spudger through the gap between the wide tape and the antenna cable, to release the adhesive connecting the two.

    • Continue pulling the wide tape until it is no longer covering the antenna cable.

    Traduire

  9. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 8, image 1 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 8, image 2 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 8, image 3 de 3

    • Use the tip of a spudger to pry the antenna cable tape up from the rear case of the iPad.

    • Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing.

    Traduire

  10. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 9, image 1 de 2 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 9, image 2 de 2

    • Pull the antenna cable from the slot behind the Lightning connector.

    Traduire

  11. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 10, image 1 de 2 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 10, image 2 de 2

    • Use the tip of the spudger to pry the antenna cable tape up from behind the right speaker as well.

    Traduire

  12. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 11, image 1 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 11, image 2 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 11, image 3 de 3

    • Use the tip of a spudger to remove the small piece of tape securing the antenna cable in the bottom right corner of the iPad.

    Traduire

  13. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 12, image 1 de 2 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 12, image 2 de 2

    • Pull the antenna cable away from its recess in the rear case.

    Traduire

  14. iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 13, image 1 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 13, image 2 de 3 iPad Mini CDMA Wi-Fi/Bluetooth Antenna Replacement: étape 13, image 3 de 3

    • Use the tip of a spudger to pry the small metal retaining clip off the antenna cable.

    • De-route the antenna cable from the clip.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 96