Réparez vos affaires Communauté Boutique

iPad Mini Wi-Fi Logic Board Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Introduction

Use this guide to replace the logic board.

Ce dont vous avez besoin

  1. iPad Mini Wi-Fi Logic Board Assembly Replacement, Logic Board Assembly: étape 1, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement, Logic Board Assembly: étape 1, image 2 de 2

    • Use tweezers to peel up and remove the small piece of tape covering the front-facing camera cable connector.

    Traduire

  2. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 2, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 2, image 2 de 2

    • The front-facing camera cable connector is secured with pieces of tape that wrap up around the sides of the cable and are fastened to two small metal plates.

    • Use a plastic opening tool to gently pry the lower metal plate up from the front-facing camera cable connector.

    • Being careful not to break the plate or the tape attached to it, pry it up and fold it away from the front-facing camera cable connector.

    Traduire

  3. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 3, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 3, image 2 de 2

    • Gently pry the second (upper) metal plate up from the front-facing camera cable connector.

    • Again, carefully pry the plate up and away from the front-facing camera cable connector.

    Traduire

  4. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 4, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 4, image 2 de 2

    • Use a plastic opening tool to pry the front-facing camera cable's connector up from its socket on the logic board.

    Traduire

  5. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 5, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 5, image 2 de 2

    • Gently fold the front-facing camera cable up and out of the way of the logic board.

    Traduire

  6. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 6, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 6, image 2 de 2

    • Use tweezers to peel up and remove the small piece of tape covering the headphone jack cable connector.

    Traduire

  7. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 7, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 7, image 2 de 2

    • Use a plastic opening tool to gently pry the lower metal plate up from the headphone jack cable connector.

    • Being careful not to break the plate or the tape attached to it, pry it up and fold it away from the headphone jack cable connector.

    Traduire

  8. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 8, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 8, image 2 de 2

    • Pry the second (upper) metal plate up from the front-facing camera cable connector.

    • Again, carefully pry the plate up and away from the headphone jack cable connector.

    Traduire

  10. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 9, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 9, image 2 de 2

    • Use a plastic opening tool to pry the headphone jack cable's connector up out of its socket on the logic board.

    • Gently bend the headphone jack cable back, away from the logic board.

    Traduire

  11. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 10, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 10, image 2 de 2

    • Use a plastic opening tool to pry the rear-facing camera cable up from its socket on the logic board.

    Traduire

  12. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 11, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 11, image 2 de 2

    • Use tweezers to peel up and remove the small piece of tape covering the button ribbon cable ZIF connector.

    Traduire

  13. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 12, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 12, image 2 de 2

    • Use the tip of a spudger to lift up the tab on the button ribbon cable ZIF connector.

    Traduire

  14. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 13, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 13, image 2 de 2

    • Use tweezers to pull the button ribbon cable straight out of its ZIF socket on the logic board.

    Traduire

  15. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 14, image 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 14, image 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 14, image 3 de 3

    • Gently peel back the wide piece of tape covering the top of the right speaker.

    Traduire

  16. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 15, image 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 15, image 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 15, image 3 de 3

    • Continue peeling the tape, and remove it from the iPad.

    Traduire

  17. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 16, image 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 16, image 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 16, image 3 de 3

    • Use the flat end of a spudger to disconnect the two bottom antenna cable connectors from their sockets on the logic board.

    Traduire

  18. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 17, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 17, image 2 de 2

    • Use the tip of a spudger to peel back the small piece of tape covering both antenna cables on the bottom right side of the iPad.

    • Leave the lower part of the tape stuck to the back of the rear case to aid in reassembly.

    Traduire

  19. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 18, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 18, image 2 de 2

    • With the tip of a spudger, peel up the larger piece of tape covering both antenna cables near the bottom of the rear case.

    • Do not try to remove this piece of tape; it is wrapped around the top antenna cable.

    Traduire

  20. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 19, image 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 19, image 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 19, image 3 de 3

    • Use the tip of a spudger to pry the small metal retaining clip off the left antenna cable, then de-route the cable from the clip.

    Traduire

  21. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 20, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 20, image 2 de 2

    • De-route the antenna cable from the corner of the iPad.

    Traduire

  22. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 21, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 21, image 2 de 2

    • Use the tip of a spudger to remove the small piece of tape securing the antenna cable in the bottom right corner of the iPad.

    Traduire

  23. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 22, image 1 de 1

    • Peel the cable back from the corner of the iPad.

    Traduire

  24. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 23, image 1 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 23, image 2 de 3 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 23, image 3 de 3

    • Use the tip of a spudger to pry the antenna cable tape up from the rear case of the iPad.

    • Gently pull the antenna cable out of the way as you work along the piece of tape, to keep it from resealing.

    Traduire

  25. iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 24, image 1 de 2 iPad Mini Wi-Fi Logic Board Assembly Replacement: étape 24, image 2 de 2

    • Pull the antenna cable from the slot behind the Lightning connector.

    Traduire
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

Andrew Optimus Goldheart

Membre depuis le 10/17/09

502 789 Réputation

407 tutoriels rédigés

Badges: 44

+ 41 badges supplémentaires

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

16 767 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 45