Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Introduction

Prerequisite only guide. Shows how to disconnect the battery for the iPad Pro 9.7".

  1. Remove the eleven 1.3 mm Phillips #00 screws securing the EMI shield.
    • Remove the eleven 1.3 mm Phillips #00 screws securing the EMI shield.

  2. Apply a heated iOpener to the EMI shield on the logic board for one minute.
    • Apply a heated iOpener to the EMI shield on the logic board for one minute.

  3. Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch

    Kits pour Nintendo Switch

    Une solution rapide pour reprendre le jeu

    Acheter un kit pour Switch
  4. Lift the logic board EMI shield, starting at the edge nearest the top of the iPad. Slowly peel the EMI shield up from the logic board. This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.
    • Lift the logic board EMI shield, starting at the edge nearest the top of the iPad.

    • Slowly peel the EMI shield up from the logic board.

    • This takes a bit of force due to the many tiny clips securing the shield, and the shield may deform slightly. That's okay—try to keep the deformation to a minimum, and it will lay flat when reinstalled and screwed down.

    • Remove the logic board EMI shield.

  5. If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield. Squeeze the sharp protrusion with a pair of pliers to flatten it. Repeat the process for all sharp protrusions along the edges of the EMI shield.
    • If the EMI shield has any sharp protrusions after removal, you should flatten them before reinstalling the shield.

    • Squeeze the sharp protrusion with a pair of pliers to flatten it.

    • Repeat the process for all sharp protrusions along the edges of the EMI shield.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membre depuis le 03/01/2018

115 387 Réputation

340 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

123 membres

11 785 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 7

Total : 45