Introduction
How to remove and replace the logic board on the iPhone 11 Pro.
Note: Each iPhone's logic board and Face ID + proximity sensor are paired at the factory, so replacing the logic board will disable Face ID unless you also install a replacement Face ID module + proximity sensor that has been properly paired to your new logic board.
Ce dont vous avez besoin
Instructions vidéo
Conclusion
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
14 autres ont terminé cette réparation.
4 commentaires de tutoriel
where can I get the parts?
Manoj Acharya - Réponse Partager
How can I say this politely……in general videos are not good. Too fast…not clear….author has accent so it’s hard to understand. Not able to zoom…goes too fast….no CLOSED CAPTIONING!!! In general this was the worst thing I have seen from iFixit! Why isn’t there a step by step guide? In the past year I have had to go to YouTube rather than iFixit 🥺
mamashannon4u - Réponse Partager
Well said! I came looking for their amazing step by step instructions. I hate videos!
KillerMiller - Réponse Partager
I changed the motherboard after that the phone keeps getting very hot even when it is switch off
Sahr - Réponse Partager