Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

Prerequisite to remove the camera after the logic board.

Pièces

Aucune pièce spécifiée.

  1. Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed. Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.
    • Using a pair of tweezers, flip the rubber camera cover out of its clip and toward the outside of the rear case.

    • Do not attempt to fully remove this cover. It is attached to the rear case and only needs to be flipped open, not removed.

  2. Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète

    Le kit d'outils Essentiel

    Les outils les plus utiles dans notre kit le plus compact.

    J'achète
  3. Remove the rear-facing camera from the rear case. During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board. If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.
    • Remove the rear-facing camera from the rear case.

    • During reassembly, the camera cable should bend in a 'U' shape to slot in behind the logic board.

    • If the rubber camera bumper has shifted, be sure to replace it before reassembling your iPhone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

Sam Goldheart

Membre depuis le 18/10/2012

426 911 Réputation

547 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

131 membres

13 426 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 1,392