Aller au contenu principal

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Prerequisite guide for disconnecting the battery connector.

    • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

    • Three 1.2 mm screws

    • One 2.4 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

  1. Remove the lower connector bracket.
    • Remove the lower connector bracket.

  2. Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to  the phone.
    • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

    • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Evan Noronha

Membre depuis le 05/02/2015

181 808 Réputation

178 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

108 membres

9 890 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 3

30 derniers jours : 6

Total : 670