Introduction

The plastic part on the bottom of the iPod.

Before opening your iPod, ensure that the hold switch is in the locked position.
  • Before opening your iPod, ensure that the hold switch is in the locked position.

Ajouter un commentaire

When removing the the bottom bezel, be sure not to bend the plastic surrounding the dock connector.
  • When removing the the bottom bezel, be sure not to bend the plastic surrounding the dock connector.

  • Carefully insert an iPod opening tool in the seam between the metal casing and white plastic bezel

  • Lift the bottom bezel off the iPod. It's glued on using a mild adhesive, so some force may be required.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

5 autre(s) ont terminé cette réparation.

iRobot

Membre depuis le 24/09/2009

1 Réputation

774 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 5

30 derniers jours : 13

Total : 13,128