Aller au contenu principal

iPod Nano 7th Generation Display Assembly Replacement

Conditions préalables uniquement
Ce tutoriel est uniquement destiné à être utilisé comme prérequis d'autres tutoriels. Il ne se suffit pas à lui-même.

Ce dont vous avez besoin

  1. iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: étape 1, image 1 de 2 iPod Nano 7th Generation Display Assembly Replacement, Display Assembly: étape 1, image 2 de 2
    • Insert a spudger under the metal midframe and display on the left side of the home button.

    • Make sure that the spudger is under the entire display assembly to prevent bending the metal midframe.

    • Rotate the spudger around the home button and across the front panel, releasing the adhesive holding the display in place.

  2. iPod Nano 7th Generation Display Assembly Replacement: étape 2, image 1 de 1
    • Once all of the adhesive has been released, gently separate the display assembly from the front glass/digitizer.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Sam Goldheart

Membre depuis le 10/18/12

465 326 Réputation

538 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

136 membres

16 579 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 69