Aller au contenu principal

Introduction

Remove the rear panel to access the internals of your Shuffle.

Pièces

Aucune pièce spécifiée.

  1. Accessing the internals of the 4th generation Shuffle is extremely difficult, as the rear panel is both glued to the front case and secured by metal retaining clips. It is highly unlikely that you will be able to remove the rear panel without inflicting cosmetic and/or structural damage.
    • Accessing the internals of the 4th generation Shuffle is extremely difficult, as the rear panel is both glued to the front case and secured by metal retaining clips. It is highly unlikely that you will be able to remove the rear panel without inflicting cosmetic and/or structural damage.

    • Before proceeding, be sure your Shuffle is switched off.

  2. Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant

    Kits pour Apple Watch

    Réparer l'écran et la batterie n'a jamais été aussi facile.

    Acheter maintenant
  3. Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch. Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch.
    • Use a combination of iPod opening tools and metal spudgers to pry the rear panel away from the Shuffle by the seam nearest the ON/OFF switch.

  4. Remove the rear panel from the Shuffle.
    • Remove the rear panel from the Shuffle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

4 autre(s) ont terminé cette réparation.

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 22

Total : 8,290