Aller au contenu principal

iRobot Roomba 4160 Brush Guard Replacement

  1. iRobot Roomba 4160 Brush Guard Replacement, Brush Guard: étape 1, image 1 de 1
    • Make sure the Roomba is turned off to prevent injury.

    • Turn the Roomba upside down so that the underside is exposed. The wheels and brushes should be visible.

    • Identify the brush guard, which is the black rectangular frame that the metal rods are attached to.

  2. iRobot Roomba 4160 Brush Guard Replacement: étape 2, image 1 de 1
    • Locate the 2 small rectangular yellow tabs on either side of the brush guard, directly adjacent to the blue flap.

    • Place index fingers on both tabs, and apply slight pressure in the direction of the yellow battery pack.

    • While you are applying pressure, the guard should hinge up in the direction of the yellow battery pack.

  3. iRobot Roomba 4160 Brush Guard Replacement: étape 3, image 1 de 2 iRobot Roomba 4160 Brush Guard Replacement: étape 3, image 2 de 2
    • After the guard hinges up, lift the guard up and away from the Roomba.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Philippe Napaa

Membre depuis le 04/07/14

222 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 6-4, Forte Spring 2014 Membre de l'équipe Cal Poly, Team 6-4, Forte Spring 2014

CPSU-FORTE-S14S6G4

5 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 288