Réparez vos affaires Communauté Boutique

iRobot Roomba 690 Spinning Brush Replacement

Introduction

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

Ce dont vous avez besoin

  1. iRobot Roomba 690 Spinning Brush Replacement, Spinning Brush: étape 1, image 1 de 1

    • Place the Roomba upside down so that the wheels and brushes are facing upward.

    Modifier

  3. iRobot Roomba 690 Spinning Brush Replacement: étape 2, image 1 de 3 iRobot Roomba 690 Spinning Brush Replacement: étape 2, image 2 de 3 iRobot Roomba 690 Spinning Brush Replacement: étape 2, image 3 de 3

    • Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.

    • Remove the spinning brush from the vacuum.

    Modifier
Conclusion

To reassemble your device, follow these instructions in reverse order.

Auteur

avec 1 autre contributeur

John Galvin

Membre depuis le 03/23/22

584 Réputation

5 tutoriels rédigés

Badges: 6

+ 3 badges supplémentaires

Équipe

UMass Dartmouth, Team 1-1, Botvin Spring 2022 Membre de l'équipe UMass Dartmouth, Team 1-1, Botvin Spring 2022

UMASSD-BOTVIN-S22S1G1

3 membres

5 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 4

Total : 150