Aller au contenu principal

iRobot Roomba 860 Debris Extractor Cleaning / Replacement

Ce dont vous avez besoin

  1. iRobot Roomba 860 Debris Extractor Cleaning / Replacement, Debris Extractors: étape 1, image 1 de 2 iRobot Roomba 860 Debris Extractor Cleaning / Replacement, Debris Extractors: étape 1, image 2 de 2
    • To remove the debris extractor, first begin by removing and emptying the trash bin.

    • Push down and pull out on the silver button located on the top of the Roomba in the back.

    • The trash bin should then slide out.

  2. iRobot Roomba 860 Debris Extractor Cleaning / Replacement: étape 2, image 1 de 2 iRobot Roomba 860 Debris Extractor Cleaning / Replacement: étape 2, image 2 de 2
    • With the Roomba upside down, locate the two yellow buttons by the extractor.

    • To open the flap holding the extractos in place, pinch the two yellow buttons together towards the center and pull up on the flap at the same time

  3. iRobot Roomba 860 Debris Extractor Cleaning / Replacement: étape 3, image 1 de 3 iRobot Roomba 860 Debris Extractor Cleaning / Replacement: étape 3, image 2 de 3 iRobot Roomba 860 Debris Extractor Cleaning / Replacement: étape 3, image 3 de 3
    • Once the flap is open, grab the yellow end of the dark gray extractor and pull up slightly.

    • After lifting it up about an inch, pull it out towards one of the side wheels.

    • The extractor should slide out with ease. Repeat the same procedure for the light gray debris extractor.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

Ryan Murphy

Membre depuis le 03/02/17

446 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team S13-G5, Cagle Spring 2017 Membre de l'équipe USF Tampa, Team S13-G5, Cagle Spring 2017

USFT-CAGLE-S17S13G5

4 membres

4 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 14

Total : 1,409