iRobot Roomba e5 Brush Replacement

Introduction

This guide will help you replace the main brushes on the iRobot Roomba e5. Before you use this guide, clean your brushes to make sure that debris was not causing the problem. If your brushes still don't work, then they will need to be replaced.

Étape 1 Brush

iRobot Roomba e5 Brush Replacement, Brush: étape 1, image 1 de 1

Flip the Roomba upside down.

Modifier

Étape 2

Release the lock on the brushes using the green tab.
Lift the lock up from the end of the brushes.

Modifier

Étape 3

iRobot Roomba e5 Brush Replacement: étape 3, image 3 de 3

Remove both of the brushes.
When reassembling the brushes, make sure to insert the long end first.
The two long ends each have a different shape. One end is a square and one end is a rectangle.
You may have to rotate the brushes while inserting so that they snap into place.