Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Remove six 4.8mm screws with a JIS #00 screwdriver.
-
Remove two 3.2mm screws with aJIS #00 screwdriver.
-
Disconnect three cables from the front of the motherboard.
-
Slowly lift the motherboard exposing the bottom side.
-
Remove the ribbon cable from the back of the motherboard.
-
Remove the motherboard.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.