Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 7
Étape 7
-
Remove the five ribbon connectors along the bottom of the assembly using either needle nose tweezers or a plastic opening tool to flip the small flaps to the "up" position.
-
Use a nylon spudger to pull each ribbon connector out of its connection using the hole in the center of the ribbon.
| - | [* black] Now to remove all of the bottom ribbon connectors. |
|---|---|
| + | [* red] Remove the five ribbon connectors along the bottom of the assembly using either needle nose [product|IF145-020|tweezers] or a plastic opening tool to flip the small flaps to the "up" position. |
| + | [* black] Use a nylon spudger to pull each ribbon connector out of its connection using the hole in the center of the ribbon. |
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.