Dell Precision 5530 Disassembly

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Dell Precision 5530 Disassembly, Bottom case: étape 0, image 1 de 3

Dell Precision 5530 Disassembly, Bottom case: étape 0, image 2 de 3

Dell Precision 5530 Disassembly, Bottom case: étape 0, image 3 de 3

Bottom case

Turn off the machine, close the lid, and flip it over so it's laying upside down, hinge away from you.
Recommend a soft anti-static surface for this so as to not scratch the exterior.
Remove the ten (10) torx (T5) screws around the edges of the case.
Flip up the magnetic "lid" that says "Precision 5530" to expose the service tag and two Phillips (PH1) screws. Remove these.
Starting from the hinge side, slowly lift the rear case off. There are a few snaps, this is normal. There are no cables attached, so when it comes free, put it off to the side.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.