Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.
Traduction de l’étape 1
Étape 1
-
On the bottom of the laptop, use the Phillips screwdriver to remove nine total 5 mm screws from the following locations:
-
Four screws at each corner of the laptop’s bottom panel
-
Two screws within the battery slot
-
One screw to the left of the hard drive
-
Two screws located below the RAM
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.