Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.
Traduction de l’étape 2
Étape 2
-
Use the black spudger to unclip the ribbon on the top right corner and then remove it using the nylon tipped tweezers.
-
Remove one silver 2mm #00 Philips screw found underneath the ribbon.
-
Once the screw is removed, the top panel is completely detached from the device. To remove it, grab it by hand and gently pull it off the device.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.