Aller au contenu principal

Changer le module antenne NFC & bobine de charge du Samsung Galaxy S21 Plus

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 16 tutoriels qui comprennent cette étape.

Anglais
Français

Traduction de l’étape 1

Étape 1
Samsung Galaxy S21 Plus NFC Antenna & Charging Coil Assembly Replacement, Slice the adhesive: étape 0, image 1 de 3 Samsung Galaxy S21 Plus NFC Antenna & Charging Coil Assembly Replacement, Slice the adhesive: étape 0, image 2 de 3 Samsung Galaxy S21 Plus NFC Antenna & Charging Coil Assembly Replacement, Slice the adhesive: étape 0, image 3 de 3
Slice the adhesive
  • Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event.

  • Be careful of the cable that runs beneath the charging coil. Work slowly and stop sliding the pick if it catches on the cable.

  • Insert an opening pick underneath the left bottom end of the NFC antenna and charging coil assembly.

  • Carefully slide the opening pick along the bottom left edge of the assembly to separate it from the battery.

Veillez à ni perforer ni tordre la batterie avec votre outil, car une batterie endommagée peut laisser s'échapper des substances chimiques dangereuses ou prendre feu, voire exploser.

Attention à la nappe située sous la bobine de charge. Travaillez lentement et arrêtez le mouvement du médiator s'il se prend dans la nappe.

Insérez un médiator en bas à gauche du module d'antenne NFC et bobine de charge.

Faites glisser le médiator soigneusement le long du bord inférieur gauche du module, afin de le détacher de la batterie.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.