MacBook Pro 13" Touch Bar 2018 Logic board Replacement

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 21

Étape 21

MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: étape 0, image 1 de 3

MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: étape 0, image 2 de 3

MacBook Pro 13" Touch Bar 2018 Logic board Replacement, Unplug Touch ID and Auxiliary port: étape 0, image 3 de 3

Unplug Touch ID and Auxiliary port

Use a T4 Torx driver to remove the two screws.
Two T4 Torx screws.
Carefully remove the metal shield.
Under the metal shield you will find two connectors, carefully unclip them.
The second cable you will disconnect will be lightly adhered so carefully slide a plastic spudger under it and finally unplug it.
The adhered cable is very thin and delicate so don't rush it and take your time.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.