Logic Board Removal

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 7 tutoriels qui comprennent cette étape.

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 13

Étape 13

Logic Board Removal, Remove the front camera: étape 0, image 1 de 3

Logic Board Removal, Remove the front camera: étape 0, image 2 de 3

Logic Board Removal, Remove the front camera: étape 0, image 3 de 3

Remove the front camera

Use tweezers to grab the front camera by its connector, as close to the camera body as possible.
Don't pinch the press connector's pins, as you may bend them.
Pull straight up to separate the adhesive and remove the front camera.
During reassembly, if your adhesive is still intact and sticky, you can reuse it. Otherwise, follow this guide to replace the adhesive.
If you don't have custom cut adhesive strips, use double-sided tape, like Tesa Tape, to secure the front camera to the frame.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.