Traduction de l’étape 11
Étape 11
Removing the main heating device
-
The heating device was screwed in with 4, M3 x 0.5mm Phillips Head Screw. This was situated on top of the heating cone, underneath the steam chamber.
-
This the rim of the base that grips the heating elements in its place. It also helps keep the element relatively clean.
-
Rim Outer Diameter: 64mm
-
Rim Inner Diameter: 50mm
-
Length/diameter of the base: 57mm
-
Height: 46mm
-
Screw head diameter: 7mm
-
Screw shaft length: 12mm
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.