Xbox Series X/S Wireless Controller Joystick Replacement

Anglais

Français

Traduction de l’étape 17

Étape 17

Desolder the frame anchors

Secure the circuit board so that the solder joints face upward.
Use your soldering iron to heat a solder joint securing one of the frame anchors.
Once the solder is melted, use tweezers to grab and pull the frame anchor out of its through-hole.
If you're having trouble melting the solder joint, apply some leaded solder onto your soldering iron tip and try again.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.