Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.
Traduction de l’étape 3
Étape 3
-
The antenna loop board needs to be pried up (it is glued down). Gently use a plastic opening tool or spudger, to dislodge the antenna loop board. The board is connected to the antenna electronics by a small ribbon cable. This two-board assembly is very frail.
-
The two small antenna circuit boards can now be lifted up together, and their orange cable can be peeled from the display.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.