Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront le tutoriel qui comprend ces étapes.
Traduction de l’étape 8
Étape 8
-
Turn the camera over so the top panel that reads "Image Stabilizer" is facing up.
-
Remove the two 2.4mm PH000 screws from the top of the camera to the left of the power on/off switch.
-
Gently remove the panel from the side of the camera.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.