Sega Dreamcast Controller Restoration/Retro Console Restoration

Retourner au tutoriel

Anglais

Français

Étape précédente Étape suivante

Traduction de l’étape 2

Étape 2

Sega Dreamcast Controller Restoration/Retro Console Restoration, Disassemble the Controller: étape 0, image 1 de 3

Sega Dreamcast Controller Restoration/Retro Console Restoration, Disassemble the Controller: étape 0, image 2 de 3

Sega Dreamcast Controller Restoration/Retro Console Restoration, Disassemble the Controller: étape 0, image 3 de 3

Disassemble the Controller

There are a total of 8 screws that will need to be removed for this project. 6 external and 2 internal.
Use your #1 screwdriver to remove the 6 external screws and remove the back plate of the controller.
Remove the 2 internal screws and remove the controller board.
Remove the 3 rubber pads and all the buttons from the front controller cover and controller board and set them off to the side for now.
I put the 8 screws in a container with enough rubbing alcohol to submerge them. This removes years of dirt and they come out looking like new. This is completely optional.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.