Aller au contenu principal

Sega Dreamcast Controller Restoration/Retro Console Restoration

Anglais
Français

Traduction de l’étape 7

Étape 7
Sega Dreamcast Controller Restoration/Retro Console Restoration, Polishing the Buttons and Front Shell: étape 0, image 1 de 3 Sega Dreamcast Controller Restoration/Retro Console Restoration, Polishing the Buttons and Front Shell: étape 0, image 2 de 3 Sega Dreamcast Controller Restoration/Retro Console Restoration, Polishing the Buttons and Front Shell: étape 0, image 3 de 3
Polishing the Buttons and Front Shell
  • If you're restoring a white shell controller you're only polishing the buttons in this step.

  • Here's where your aluminum foil, microfiber clothes, Novus Plastic Polish #2 and dish soap comes into play. Following the instructions on the back of the bottle, apply and buff polish to the buttons/shell until you're satisfied with results. I personally repeat this process 3 times.

  • After the final coat is applied I use the dish soap to do a final clean of the shell and to remove any remaining polish. I use the dish soap because it's a little thicker, and lathers more which helps get the remaining polish off.

  • This process is tedious and slightly time consuming. I average 1-1.5hrs work time when polishing, buffing, rinsing and repeating 3 times and the final clean with dish soap. The end results are worth it but you can polish your stuff as much as you feel is necessary.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.