Aller au contenu principal

Ce tutoriel a des changements plus récents. Passer à la dernière version non vérifiée.

the Panasonic SA-PM17 Tape Player Unit Replacement

Ce dont vous avez besoin

  1. the Panasonic SA-PM17 Tape Player Unit Replacement, Tape Player Unit: étape 1, image 1 de 2 the Panasonic SA-PM17 Tape Player Unit Replacement, Tape Player Unit: étape 1, image 2 de 2
    • Using a philips screwdriver, remove these eight 9.5 mm screws on the left and right sides of the device and place aside.

  2. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 2, image 1 de 1
    • Remove these five 11.5 mm screws and place aside.

  3. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 3, image 1 de 1
    • Lift the right side off of the device and place aside. Repeat for left side.

  4. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 4, image 1 de 1
    • Lift the top of the device gently but firmly from the back part until fully detached.

    • Allow the top to rest on the back without reattaching it.

    • CAUTION: Do not lift the top too far as there are wires attached to it.

  5. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 5, image 1 de 2 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 5, image 2 de 2
    • Lift up on the tabs indicated to disengage them from the hooks holding them in place.

  6. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 6, image 1 de 1
    • Lift the top up while firmly sliding it towards the back of the device.

    • CAUTION: Do not lift the top too high as there are cords that need to be detached before the top can be removed.

  7. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 7, image 1 de 2 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 7, image 2 de 2
    • The second picture shows a close up of the region indicated in the first picture.

    • Remove the small black wire indicated. Grip the wire near its base and pull gently but firmly until it pops out of the slot.

  8. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 8, image 1 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 8, image 2 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 8, image 3 de 3
    • This step deals with the indicated area of the device.

    • Using fingers or tweezers, lift the indicated tabs out until the cord's restraint looks like the final picture.

    • Gently pull on the cord near it's base until it comes free of the restraint.

  9. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 9, image 1 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 9, image 2 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 9, image 3 de 3
    • This step deals with the indicated area of the device.

    • Lift the indicated tabs out until the restraint looks like the final picture.

    • Gently pull on the cord until it comes free of the attachment.

    • The top section of the device should now be free of the body.

  10. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 10, image 1 de 2 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 10, image 2 de 2
    • Remove the four indicated 12.1 mm screws and place aside.

  11. the Panasonic SA-PM17 Tape Player Unit Replacement: étape 11, image 1 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 11, image 2 de 3 the Panasonic SA-PM17 Tape Player Unit Replacement: étape 11, image 3 de 3
    • This step deals with the indicated area.

    • Using fingers or tweezers, pull the indicated latch to the right to disconnect the tape player unit from the top of the device.

    • While holding the latch to the right, lift the unit up from the plastic.

    • CAUTION: When the latch is disengaged, the tape cover may push out and force the rest of the apparatus to pop up. This is normal, but be careful that the tape cover does not pop out too quickly.

    • NOTE: When placing this unit back on the device, you don't need to follow this step, you can simply push the unit into position and the latch will automatically snap into position.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autres ont terminé cette réparation.

NathanB

Membre depuis le 04/13/11

418 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team 4-1, Regan Spring 2011 Membre de l'équipe Cal Poly, Team 4-1, Regan Spring 2011

CPSU-REGAN-S11S4G1

3 membres

5 tutoriels rédigés

2 commentaires

The problem with my micro system pm17 is that the tape drive's head does not work. I noticed that it is a gear that has the function to trigger,The gearbox has probably moved out of its original position and is now not turning the read head.How do I return the gear to the original position so that it re-engages the bedhead?

Rogerio - Réponse

Add a comment

The problem with my micro system pm17 is that the tape drive's head does not work. I noticed that it is a gear that has the function to trigger,The gearbox has probably moved out of its original position and is now not turning the read head.How do I return the gear to the original position so that it re-engages the bedhead?

Rogerio - Réponse

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 13

Total : 3,422