Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.
  • The next few steps bring your hands close to the exposed face of the power supply. Do not touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.

  • Remove four T10 Torx screws securing the power supply to the rear case.

  • Two fine-thread 7 mm T10 Torx

  • Two coarse-thread 7 mm T10 Torx

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.