Aller au contenu principal

Sostituzione sensore Home/Touch ID nell'iPhone 8 Plus

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 2 tutoriels qui comprennent cette étape.

Anglais
Italien

Traduction de l’étape 3

Étape 3
iPhone 8 Plus Home/Touch ID Sensor Replacement: étape 0, image 1 de 3 iPhone 8 Plus Home/Touch ID Sensor Replacement: étape 0, image 2 de 3 iPhone 8 Plus Home/Touch ID Sensor Replacement: étape 0, image 3 de 3
  • Pry under the left edge of the home button cable connector to disconnect it from its socket.

  • If the entire connector begins to flip up without separating, press down on the cable at the top edge of the connector with the flat of your spudger, while simultaneously prying up the left edge of the connector. Be very careful not to damage the cable or connector, or you will permanently disable the sensor.

Fai leva sotto il bordo sinistro del connettore del cavo del pulsante home per disconnetterlo dal suo zoccolino.

Se l'intero connettore inizia a sollevarsi ma non si stacca, premi con la parte piatta del tuo spudger sul cavo in corrispondenza del bordo superiore del connettore, mentre allo stesso tempo sollevi il bordo sinistro del connettore. Stai attento a non danneggiare il cavo o il connettore, perché potresti disabilitare permanentemente il sensore.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.