Aller au contenu principal

iPhone X ペンタローブネジの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 23 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 1

Étape 1
iPhone X Pentalobe Screws Replacement: étape 0, image 1 de 1
  • Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

  • Power off your iPhone before beginning disassembly.

  • Remove the two 6.9 mm-long pentalobe screws at the bottom edge of the iPhone.

  • If the screws are stripped or damaged, replace the screws.

  • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

作業開始前にiPhoneのバッテリーを25%以下まで放電してください。充電されたリチウムイオンバッテリーは、穴が空いた場合、引火や爆発の恐れがあります。

分解を始める前に、iPhoneの電源を切ってください。

iPhone下部底面に留められた2本の6.9㎜ロングタイプのペンタローブネジを取り外します。

ネジが潰れたり、ダメージが入った場合は、交換してください

iPhoneのディスプレイを開口することにより、ディスプレイの耐水シールが破損します。このステップを進める前に交換用のシールを用意しておくか、耐水シールの交換をしないで再組み立てする場合は液体の浸水に注意してください。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.