Aller au contenu principal
Anglais
Français

Traduction de l’étape 8

Étape 8
Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown). Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.
  • Use an 8 mm bit driver to remove the four hex bolts from around the perimeter of the boiler (only two are shown).

  • Remove the 2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the Barista.

  • At this point, the boiler is free from the Barista and can be removed.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.