Aller au contenu principal

Huawei P10 Vervanging van de achterste behuizing

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 11 tutoriels qui comprennent cette étape.

Anglais
Néerlandais

Traduction de l’étape 2

Étape 2
Huawei P10 Back Cover Replacement: étape 0, image 1 de 3 Huawei P10 Back Cover Replacement: étape 0, image 2 de 3 Huawei P10 Back Cover Replacement: étape 0, image 3 de 3
  • Insert a plastic opening tool between the display and the case starting at the bottom area of your phone.

  • Carefully pry the display with its parts out of the case.

  • Getting the prying tool in will require some effort, be careful not to slide the tool too much or you might slightly damage the housing.

  • After you pried out the bottom end, use the opening tool to open the clamps on both sides.

Steek een plastic openingstool tussen het scherm en de behuizing, beginnend bij de onderkant van je telefoon.

Wrik het scherm, op voorzichtige wijze en inclusief alle onderdelen, uit de behuizing omhoog.

Het kan wat moeite kosten om de wriktool in het toestel te krijgen. Zorg dat je de tool niet te ver in het toestel duwt, aangezien je daarmee riskeert de behuizing te beschadigen.

Nadat je het onderste deel uit de behuizing hebt weten te duwen, gebruik je je openingstool om de klemmen aan beide kanten van het toestel te openen.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.