Aller au contenu principal
Anglais
Français

Traduction de l’étape 1

Étape 1
Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides. Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides. Remove the four 2.0 mm Phillips screws  of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.
  • Remove the four 2.0 mm Phillips screws of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.