Aller au contenu principal

Samsung Galaxy S8+のバックガラスの交換

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 5 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 3

Étape 3
Samsung Galaxy S8+ Back Glass Replacement: étape 0, image 1 de 2 Samsung Galaxy S8+ Back Glass Replacement: étape 0, image 2 de 2
  • Secure a suction cup to the back cover, as close to the heated edge as possible.

  • The suction cup will not make a good seal on the curved portion of the glass, so avoid putting it on the very edge.

  • If the phone's back cover is cracked, the suction cup may not stick. Try lifting it with strong tape, or superglue the suction cup in place and allow it to cure so you can proceed.

  • Lift the back cover's left edge with your suction cup, opening a slight gap between the back cover and the frame.

  • This may require a significant amount of force, but you only need to open a very slight gap with the suction cup to insert your tool.

  • If you have trouble, apply more heat to further soften the adhesive, and try again. The adhesive cools very fast, so you may need to heat it repeatedly.

  • If you're using an iOpener, follow instructions to avoid overheating it, or the gel pack may burst.

吸盤カップをできるだけ温めた端の付近に装着してください。

吸盤カップをガラスのカーブしたエッジ上に装着するとうまく固定されません。そのためエッジ部分は避けてください。

デバイスのバックカバーにヒビが入った場合は、吸盤カップを使用するとうまく装着できません。頑丈な強力テープを使ってカバーを持ち上げたり、吸盤カップにスーパーボンドを付けてから持ち上げるとうまくいきます。

バックカバーの左端に付けた吸盤カップを持ち上げて、フレームとバックカバーの間に隙間を作ります。

この隙間を作るにはかなりの力が必要ですが、ツールを挿入できるだけの若干のスペースを作ってください。

作業に困ったら、いつでも該当箇所を温めて接着剤を柔らかくしてください。接着剤はすぐに冷却されて硬くなります。そのため作業は素早く行います。

iOpenerを使用している場合は、オーバーヒートしないように使用方法の手順に従ってください。iOpenerのジェルパックが爆発してしまうことがあります。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.