Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 9 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 10

Étape 10
Remove the following screws securing the logic board to the rear case:
  • Remove the following screws securing the logic board to the rear case:

  • Two 2.3 mm Phillips screws

  • Two 2.7 mm standoff screws

  • Standoff screws are best removed using a standoff screwdriver or bit.

  • In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.

  • One non-magnetic 2.7 mm standoff screw

  • Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass.

松开把主板固定在后盖上的螺丝:

2颗2.3mm飞利浦螺丝

2颗2.7mm中板螺丝

你可以通过专用的压铆螺柱螺丝刀或螺丝刀组更轻松地卸下它们。

简单说来,一个小的平头螺丝刀可以做到——但是需要额外的小心,来保证不损坏周围的部件。

1颗无帽2.7mm 压铆螺柱螺丝

确保把这颗螺丝拧在主板的顶部,带磁性的螺丝会影响数字罗盘。

[* black] Remove the following screws securing the logic board to the rear case:
[* red] Two 2.3 mm Phillips screws
[* orange] Two 2.7 mm standoff screws
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_note] Standoff screws are best removed using an [product|IF145-343|new_window=true] and [product|IF145-326|driver handle|new_window=true]a [product|IF145-388-4|standoff screwdriver|new_window=true] or bit.
[* icon_caution] In a pinch, a small flathead screwdriver will do the job—but use extra caution to ensure it doesn't slip and damage surrounding components.
[* yellow] One non-magnetic 2.7 mm standoff screw
[* icon_note] Be sure to put this screw back in its original position at the top of the logic board. A magnetized screw may interfere with the digital compass.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.