Traduction de l’étape 5
Étape 5
Disassembling the Heater - Part IV
-
This is the Speaker.
-
This is what the Speaker will look like when looking at your Circuit Board.
-
This is the outlined area you need to carefully remove with wire cutters.
-
This is the Aluminum Shielding that is under the Speaker Cover and Above the Copper coil ring. Its what creates the circuit so there is sound in the speaker. THIS IS WHAT WE ARE AFTER AND WHAT TO REMOVE.
-
This is the Speaker Cover, and as shown I removed mine through the Plus Pattern.
Vos contributions sont faites dans le cadre de la licence open source Creative Commons.