How to stop "BEEP" sound by removing the Internal Speaker.

Anglais

Français

Traduction de l’étape 8

Étape 8

Reassembling the Heater - Part III

Take the smaller cable as mention earlier and connected to back to the Circuit Board
You might have to lean over to get a good line of sight since its going to be a challenge.
I recommend getting the plug in the connector and then using a free hand with a flat head and careful pushing the tip of the flat head on the back of the connector and pushing it in.
The Connection on the other side.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.