Aller au contenu principal
Anglais
Français

Traduction de l’étape 2

Étape 2
Carefully align the linkage with the mounting holes on both legs. Place two 3mm eyeglass screws into either end of the linkage. Tighten the screws. These screws will self-tap into the legs. Be careful to not over-tighten and seize the linkage.
Attach linkage
  • Carefully align the linkage with the mounting holes on both legs.

  • Place two 3mm eyeglass screws into either end of the linkage.

  • Tighten the screws. These screws will self-tap into the legs. Be careful to not over-tighten and seize the linkage.

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.