Aller au contenu principal
Anglais
Français

Traduction de l’étape 6

Étape 6
Start by placing the bottom notched-side into the lip of the enclosure. Align all three mounting holes from above. Press firmly with both hands (avoid putting pressure on horse) and work your hands around the edges until the back is pressed flush.
Assemble back of enclosure
  • Start by placing the bottom notched-side into the lip of the enclosure.

  • Align all three mounting holes from above.

  • Press firmly with both hands (avoid putting pressure on horse) and work your hands around the edges until the back is pressed flush.

  • Secure the back of the enclosure by driving three M2 screws into place. DO NOT OVER TIGHTEN!

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Insérez ici votre traduction

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.