Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Espagnol

Traduction de l’étape 5

Étape 5
Peel the backing off of the adhesive back of the small temperature sensor board. Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the backing off of the adhesive back of the small temperature sensor board.

  • Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

Despega el reverso del adhesivo de la pequeña placa del sensor de temperatura.

Adhiere la placa del sensor de temperatura a un área de metal despejada en la superficie del SSD, tan cerca como sea posible del conector SATA.

Dobla el sobrante de los hilos del sensor de temperatura para que no queden en medio cuando instales el receptáculo.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.