Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 4 tutoriels qui comprennent cette étape.

Anglais
Japonais

Traduction de l’étape 5

Étape 5
Peel the backing off of the adhesive back of the small temperature sensor board. Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector. Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.
  • Peel the backing off of the adhesive back of the small temperature sensor board.

  • Adhere the temperature sensor board to an exposed, metal area of the surface of the SSD, as close as possible to the SATA connector.

  • Fold the excess temperature sensor wires so that they are out of the way while you install the enclosure.

温度センサーボードの接着剤の裏側をはがします。

温度センサーボードを、SSDの表面の露出した金属部分の、SATAコネクタのできるだけ近くに接着します。

邪魔にならないように、余分な温度センサーのワイヤーを折りたたみます。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.